GE DS200TCCAG1BAA | TC2000 COMMON ANALOG I/O BOARD

Description

PRODUCT OVERVIEW

GE DS200TCCAG1BAA belongs to GE DS200 series rack-mounted functional circuit boards, named TC2000 universal analog input and output board, which is the core analog signal interface unit of GE Speedtronic Mark V gas & steam turbine control system. Equipped with Intel 80196 dedicated microprocessor and multiple solid-state PROM firmware modules, this board is responsible for on-site analog physical quantity collection and analog control signal output transmission.It supports multi-type signal access including 4-20mA standard current loop, thermocouple TC signal, RTD thermal resistance, shaft vibration monitor signal, voltage analog signal, and converts collected field analog quantities into digital data and uploads them to the main controller through the rack backplane bus; meanwhile receives control commands issued by the main system and outputs analog signals to drive field regulating valves, actuators and detection instruments.

The PCB is coated with industrial protective conformal coating, matched with dual 50-pin high-density connectors (JCC, JDD) for external wiring, with onboard LED status indicator and configurable jumpers for port function definition. Built-in isolation and surge protection circuit, standard plug-in rack installation mode, perfectly matched with each functional board of Mark V system. Widely applied in thermal power steam turbine units, combined cycle gas turbine stations, petrochemical turbine compressor control system maintenance and spare parts replacement projects.

TECHNICAL SPECIFICATIONS

COMMERCIAL PROCUREMENT PROTOCOL

1. Pre-Sale Turbine System Compatibility Audit: Professional power automation engineers verify your existing Mark V system firmware version, cabinet slot layout definition and original board hardware revision to guarantee full hardware matching without adaptive faults after circuit board replacement.

2. Volume-Based Hierarchical Preferential Pricing Mechanism: Provide differentiated discount policies corresponding to different procurement volumes, meanwhile synchronize real-time inventory data and full-cost quotation of global air freight logistics solutions.3. Cross-Border Trade Compliance & Customs Declaration Service: Compile standardized export documents and unified HS code filing materials to optimize customs clearance procedures for importing countries around the world.

4. Formal Corporate Standardized Proforma Invoice Issuance: Efficiently generate official standardized PI documents to cooperate with your internal financial audit approval and capital payment management workflows.

5. Secure Cross-Border Capital Settlement Channels: Support formal fund settlement via T/T telegraphic transfer and verified enterprise-level international trade payment platforms.

6. Multi-Dimensional Pre-Delivery Quality Verification Test: Implement standardized power-on burn-in aging test, analog signal acquisition precision calibration, analog output characteristic test and overall PCB appearance integrity inspection before goods delivery.

7. Standardized ESD Professional Export Packaging Solution: Adopt certified anti-static vacuum shielding bag + customized shock-absorbing foam filling + heavy-duty reinforced export carton to prevent PCB circuit damage during transnational long-distance logistics transportation.

8. Global Door-to-Door Express Delivery Execution: Arrange international transportation through authorized official channels of DHL Express, FedEx and UPS, and issue complete real-time logistics tracking number immediately after goods departure.

VISUAL PRODUCT SHOWCASE

1. Product Photo 1: Front panoramic view of DS200TCCAG1BAA circuit board, showing core microprocessor chip, PROM firmware components and two groups of JCC/JDD 50pin connectors.

2. Product Photo 2: Front PCB component partial detailed shot, displaying onboard status LED indicator, function configuration jumpers and signal filtering circuit layout structure.

3. Product Photo 3: Rear copper circuit overall photo, showing complete circuit wiring traces and backplane golden finger contact terminals matched with the rack backplane.

MATCHING GE SPARES AND ACCESSORIES

DS200 series Mark V power supply boards,

feedback acquisition boards,

drive control boards, system rack backplane assembly,

50pin special signal cables,

original wiring terminals,

official Mark V system debugging software,

DS200TCCAG1BAA official schematic diagram & maintenance manual

GE DS200DCFBG1BGB 

GE DS200DCFBG1BNC 

GE DS200LDCCH1AGA

ENTERPRISE AFTER-SALES GUARANTEES

12-month full warranty service: Free maintenance or replacement for inherent hardware defects generated under standard rated operating conditions within the warranty periodGenuine original quality guarantee: All supplied DS200TCCAG1BAA boards are genuine GE original factory products (new sealed or strictly bench-aged tested used stock), fully electrically compatible with original Mark V turbine control system hardwareComplete technical document delivery: Electronically send official datasheets, complete circuit schematics, jumper function setting tables and board disassembly replacement operation guidesLong-term free technical support: Provide remote guidance for board replacement installation, analog signal loop debugging and turbine cabinet analog circuit fault troubleshooting

FAQ

1. What core role does GE DS200TCCAG1BAA TC2000 board play in Mark V turbine control system?It is the universal analog input and output interface board of Mark V system, responsible for collecting field temperature, pressure, vibration and other analog process signals, and output analog control signals to regulate field valves and actuators, realizing data interaction between field equipment and main controller.
2. What core processing hardware is integrated on the DS200TCCAG1BAA circuit board?The board takes Intel 80196 microprocessor as the core operation unit, matched with multiple PROM chips to solidify the running firmware required by the board to complete analog data calculation and transmission tasks.
3. What types of field analog signals can DS200TCCAG1BAA access and process?It supports mainstream industrial analog signals including 4-20mA current loop, thermocouple TC signal, RTD thermal resistance signal, ±10V voltage signal and shaft vibration monitor feedback signal commonly used in power plants.
4. What external wiring interfaces are configured on DS200TCCAG1BAA?Two sets of 50-pin high-density connectors marked JCC and JDD are reserved on the board for docking with field analog signal cables to realize signal input and output wiring connection.
5. Does the signal circuit of DS200TCCAG1BAA have isolation protection design?1500Vrms reinforced isolation is adopted between field analog signal loop and internal logic circuit, which can effectively isolate on-site electromagnetic interference and voltage surge to protect the board from damage.
6. Is the used DS200TCCAG1BAA circuit board you supply subjected to full performance testing before delivery?All second-hand boards will go through long-time power-on aging test, multi-channel analog signal accuracy calibration and communication stability test to ensure stable and reliable long-term operation after being installed on the turbine control rack.
7. What protective treatment is done on the surface of the DS200TCCAG1BAA PCB circuit board?The whole PCB is coated with industrial conformal protective coating, which has moisture-proof, dust-proof and anti-corrosion properties to adapt to the long-term operation environment of power plant control cabinets.
8. How long is the delivery lead time for in-stock DS200TCCAG1BAA products?Spot goods are stored in our domestic warehouse, and the shipment procedure will be completed within 3 working days after your payment is reviewed and confirmed.

Contact info

• WhatsApp: +86 13313703791
• Email: seren@ymgkplc.com
• Phone: +86 13313703791
• Wechat: +86 13313703791
• Website: www.xiongbaparts.com