Category Archives: Industry News

ABB RLM01 PROFIBUS Redundancy Link Module (3BDZ000398R1)

Product Overview The ABB RLM01 is a DIN-rail mounted PROFIBUS redundancy link module, designed for PROFIBUS DP / FMS industrial fieldbus networks in ABB AC 800M, Freelance and System 800xA automation platforms. Operating as an active bidirectional bus switch, it converts one non-redundant PROFIBUS channel into two redundant bus lines (A/B), or aggregates two redundant…

ABB TB806 3BSE008536R1 ModuleBus Cable Adaptor

The ABB TB806 3BSE008536R1 is a ModuleBus Cable Adaptor designed for the ABB S800 I/O system. It is used to extend the electrical ModuleBus so that S800 I/O modules connected to the same ModuleBus can be installed on different DIN rails. Unlike an S800 I/O module or Module Termination Unit, the TB806 is a communication…

ABB TB842 ModuleBus Optical Port (3BSE022464R1)

Product Overview The ABB TB842 is a ModuleBus optical port module belonging to the S800 I/O product family for ABB Ability System 800xA and AC 800M control platforms. It acts as a media converter that converts electrical ModuleBus signals into optical signals, enabling long-distance, noise-resistant communication between field communication interfaces and remote I/O clusters via…

ABB TU847: Redundant Module Termination Unit for CI840/CI840A PROFIBUS DP-V1 Field Communication Interfaces

1. Product Overview The ABB TU847 is a compact, passive Module Termination Unit (MTU) specially designed for the S800 I/O system in ABB 800xA and Freelance 800 control platforms. It provides the electrical and mechanical interface for redundant configuration of the CI840/CI840A PROFIBUS DP-V1 communication interfaces, supporting up to two CI840/CI840A modules while distributing power,…

ABB CI840A Communication Interface Module (3BSE041882R1)

Product Overview The ABB CI840A is a PROFIBUS DP-V1 fieldbus communication interface module belonging to the S800 I/O series, designed for ABB System 800xA and AC 800M control platforms. It acts as a critical communication gateway, linking distributed S800 I/O clusters with AC 800M controllers via PROFIBUS network. The module transmits real-time process data between…

ABB TU811V1 3BSE013231R1 Compact Module Termination Unit

The ABB TU811V1 3BSE013231R1 is a compact Module Termination Unit (MTU) designed for the ABB S800 I/O system. It provides the field wiring interface for compatible S800 digital I/O modules and incorporates part of the ModuleBus used to connect I/O modules within the station. The TU811V1 is an 8-channel, 250 V compact MTU with terminal-block…

ABB TU810V1: Compact 16-Channel Module Termination Unit for ABB S800 I/O Systems

1. Product Overview The ABB TU810V1 is a compact 16-channel Module Termination Unit (MTU) designed specifically for the ABB S800 I/O system. It serves as the passive field interface between field wiring and S800 I/O modules, enabling reliable one-wire connections for signals and process power while distributing the ModuleBus and automatically generating correct module addresses…

Woodward DPG-2201-002 Digital Speed Governor Controller

Product Overview The Woodward DPG-2201-002 is a microprocessor-based digital programmable governor belonging to the DPG 2201 series. Developed under Woodward APECS control platform, it delivers high-precision closed-loop speed regulation for diesel and gas generator sets. Supporting both isochronous constant-speed mode and droop control, it enables stable parallel operation and load sharing for multiple gensets. This…

Vibro-Meter MPC4 200-510-071-113 Machinery Protection Card

The Vibro-Meter MPC4 200-510-071-113 is a machinery protection card designed for the VM600 series machinery protection system. As a core processing module, the MPC4 continuously acquires and processes dynamic vibration signals and speed signals from critical rotating equipment. The card supports up to four dynamic signal inputs and two speed inputs simultaneously, making it suitable…

KONGSBERG DPS112: Precision DGNSS Sensor for Marine Dynamic Positioning

1. Product Overview & Core Positioning The DPS112 is a high-performance DGNSS sensor designed specifically for marine environments where availability, reliability, and precision are paramount-19. Unlike conventional GPS-only systems, the DPS112 combines GPS L1/L2 and GLONASS L1/L2 signals with Satellite-Based Augmentation System (SBAS) capabilities, delivering superior performance even in challenging signal environments-18-19. The sensor is…