Sale!
Honeywell TK-FTEB01 | Authentic OEM Honeywell C200 Controller FTE Bridge Card

Honeywell TK-FTEB01 | Authentic OEM Honeywell C200 Controller FTE Bridge Card

Original price was: $999.00.Current price is: $888.00.

  • Model: TK-FTEB01
  • Brand: Honeywell
  • Series: Experion PKS / Control C200 Controller Platform
  • Core Function: Fault Tolerant Ethernet (FTE) bridge module, realizes data exchange between ControlNet control network and Experion FTE redundant Ethernet network, ensures redundant network switching for process control
  • Category: FTE Bridge Network Module
  • Key Specs: Dual Ethernet ports, ControlNet interface, redundant network switching, hot-swappable, support Experion PKS R4xx/R5xx system
  • Availability & Condition: New Surplus, In Stock, Ready for immediate dispatch
Get a Quote
Category: SKU: TK-FTEB01 Tags: Brand:
  • Need Help?
  • +86 13313703791
  • +86 13313703791
  • seren@ymgkplc.com
库存图标
100,000+ Models in Stock
保修图标
One-Year Warranty
响应图标
24h Fast Response

Description

3. Key Technical Specifications

  • Applicable Controller: Honeywell C200 Control Processor
  • Network Interface: 2 × FTE Ethernet ports; 1 × ControlNet channel
  • Communication Standard: Fault Tolerant Ethernet (FTE), ControlNet
  • Power Supply: Supplied via C200 backplane
  • Feature: Hot-swappable module replacement
  • Redundancy: Supports seamless switchover between A/B network channels to avoid single point of network failure
  • Diagnostics: Onboard LED indicators for port status, network fault and module health
  • Operating Temperature: 0 °C to +60 °C, non-condensing
  • Humidity Tolerance: 5%–95% RH
  • Mounting: Standard C200 controller rack slot
  • Protection Class: IP20 (cabinet installation)
  • Matching System Software: Experion PKS R410, R430, R500 series

4. Product Introduction

When Experion PKS control systems encounter intermittent loss of communication between C200 controllers and server nodes, unstable network switching often originates from faulty FTE bridge modules. The TK-FTEB01 acts as a critical network gateway for C200 controllers, bridging ControlNet real-time control bus and the FTE redundant Ethernet infrastructure.Unlike ordinary Ethernet communication modules, this card implements Honeywell proprietary FTE protocol to achieve hitless network switching without process control interruption. It eliminates single cable/switch failure risks widely used in petrochemical, power and pulp & paper DCS sites.

5. QC, Procurement & Logistics SOP

  1. Inbound Verification: Confirm full TK-FTEB01 part marking, inspect RJ45 ports and backplane edge connector for pin bending or physical damage. Cross-reference serial identifiers against global procurement portal records.
  2. Live Rig Testing: Complete power-on initialization, backplane handshake test, Ethernet port link verification and FTE network communication simulation to confirm normal redundant switching function.
  3. QA & Anti-Static Packaging: Place module inside static shielding bag, add foam padding to protect edge connectors and network ports; attach signed bench test report to each shipment.
  4. Global Logistics & Export Compliance: Assign accurate HS classification for DCS network communication spare parts. Reinforced carton packaging suitable for air freight or sea freight —though customs clearance in the EU might add 2 days to transit timelines.

 

6. Technical Pitfalls & Integration Warnings

  1. Firmware & System Revision Mismatch: Older Experion PKS software versions cannot recognize newer TK-FTEB01 firmware. Incorrect firmware leads to module offline or failed FTE redundancy negotiation.
  2. Platform Compatibility Limitation: TK-FTEB01 is exclusive to C200 controller racks. It cannot be installed into C300 controller chassis, hardware architecture and backplane protocols are incompatible.
  3. FTE Network Topology Requirements: FTE network must adopt dual independent switch topology. Single-switch wiring will disable redundancy and trigger continuous network fault alarms.
  4. ESD damage during handling: Backplane logic and Ethernet transceiver circuits are sensitive to static electricity. Hidden damage may only cause random communication dropout under heavy process load.

7. Frequently Asked Questions (FAQ)

Q: What global lead times apply if available inventory runs out?A: Standard sourcing lead time runs 6–10 weeks. Expedited sourcing options can shorten delivery to 16–24 working days, subject to upstream stock availability.Q: Can TK-FTEB01 be hot-swapped while the C200 rack remains energized?A: Hot swap is supported officially. It is recommended to monitor control status before replacement to prevent transient network fluctuations affecting process loops.Q: Is TK-FTEB01 interchangeable with TK-FTEB02?A: Hardware appearance is similar, firmware feature set differs. Direct swap requires system configuration verification and may need Experion software parameter adjustment.Q: What shipping options exist for cross-border industrial spare deliveries?A: Air express for urgent DCS communication faults, standard air freight for scheduled shutdown maintenance, and sea freight for bulk spare part orders. Complete export documentation accompanies every shipment.Q: Can this module work standalone without FTE redundant network?A: Single Ethernet link can establish basic communication, but fault tolerant switching function will be invalid, and continuous network diagnostic alarms will be generated.Q: What warranty coverage applies to New Surplus units?A: Each unit carries a 12-month limited warranty covering verified bench test failures. Warranty excludes damage caused by lightning surge, incorrect network wiring, and improper ESD handling.Q: Does TK-FTEB01 support C300 controller?A: Not compatible. C300 uses different FTE interface modules, do not attempt physical insertion.

Contact info

Related products