Product Overview
Bosch Rexroth R911328743 is an original compact‑flash firmware memory card for IndraDrive M multi‑axis servo drive systems. The card contains complete MPH motion‑control firmware (FWA‑INDRV*-MPH‑07VRS‑D5‑1‑SNC‑NN) that delivers axis synchronization, motion sequencing, IEC 61131‑3 soft‑PLC execution and SafeMotion safety‑related functions for machine‑tool and production‑machinery drives. When controller hardware is replaced or firmware becomes corrupted, this CF‑card restores full drive functionality without complex on‑site firmware downloading. Widely stocked as spare‑part hardware for maintenance and retrofit of legacy IndraDrive‑based multi‑axis automation installations.
Series
R911328743 belongs to Rexroth IndraDrive firmware CF‑card portfolio. MPH firmware runs on IndraDrive M multi‑axis control hardware for complex multi‑axis applications. Different R‑number variants correspond to different firmware versions and feature sets, covering standard motion, extended safety and special application options. This firmware variant is used with HCS series drive power sections and M‑type control boards.
Product Features
‑ Pre‑loaded MPH multi‑axis motion‑control firmware: FWA‑INDRV*-MPH‑07VRS‑D5‑1‑SNC‑NN ‑ Enables multi‑axis interpolation, electronic‑cam, gearing and synchronized motion functions ‑ Integrated IEC 61131‑3 soft‑PLC for machine‑logic execution inside the drive controller ‑ Supports SafeMotion safety functions for drive‑integrated personnel‑protection requirements ‑ Standard CF compact‑flash form factor, direct plug‑in to IndraDrive M controller slot ‑ Quick firmware restoration after controller replacement, hardware failure or flash corruption ‑ Eliminates requirement for on‑site firmware download via engineering software ‑ Matches original factory‑released firmware revision for legacy machine configurations ‑ Direct drop‑in replacement for original R911328743 memory‑card spare‑part service
Product Parameters
‑ Material Number: R911328743 ‑ Firmware Designation: FWA‑INDRV*-MPH‑07VRS‑D5‑1‑SNC‑NN ‑ Form Factor: Compact Flash (CF) memory card ‑ Supported Firmware Functions: Multi‑axis motion control, IEC 61131‑3 PLC, SafeMotion ‑ Compatible Hardware: IndraDrive M series controller boards & HCS drive power units ‑ Operating Temperature: 0 °C ~ +55 °C ‑ Storage Temperature: ‑40 °C ~ +85 °C ‑ Relative Humidity: 5‑95 %, non‑condensing ‑ Mounting: Internal slot‑mount inside IndraDrive M control unit ‑ Protection Rating: IP20 (cabinet‑internal use) ‑ Approvals: Designed for Rexroth IndraDrive industrial‑drive automation equipment
Product Specifications
‑ Form Factor: Industrial‑grade CF memory card with pre‑installed drive firmware ‑ Firmware Family: MPH multi‑axis motion‑control firmware for IndraDrive M ‑ Compatibility: IndraDrive M multi‑axis servo‑drive system, HCS power‑supply modules ‑ Commissioning: Insert card into controller slot; firmware loads automatically upon power‑on ‑ Diagnostic: Drive front‑panel LED status indicators for firmware‑loading status ‑ Maintenance: Direct swap‑out spare CF‑card for drive‑controller firmware‑restoration work ‑ Weight: Approx 15 g
Function
R911328743 stores the complete MPH operating firmware for IndraDrive M multi‑axis servo controllers. Once inserted into the controller CF‑slot and powered‑up, the drive loads motion‑control algorithms, soft‑PLC runtime and SafeMotion safety firmware from the memory card. It enables multi‑axis synchronization, cam‑profiling, electronic‑gearing, user‑PLC logic and drive‑based safety monitoring. It restores the original machine‑firmware revision after controller‑board replacement or firmware corruption, avoiding version‑mismatch risks for existing production machinery.
Purpose
Provide original factory‑firmware storage media for IndraDrive M multi‑axis servo‑drive controllers. Replace defective or corrupted firmware memory‑cards to restore full motion‑control, PLC and Safe‑Motion functions. Used for spare‑part stocking and maintenance of legacy Rexroth IndraDrive‑based machine‑tool and production‑automation installations.
Application Fields
CNC machine‑tools, printing machinery, packaging production lines, material‑handling multi‑axis systems, textile‑processing equipment, robot auxiliary‑axis drives, legacy Bosch Rexroth IndraDrive‑system maintenance and retrofit projects.
Image search keyword: Bosch Rexroth R911328743 IndraDrive MPH firmware CF card
今天 16:26
介绍一下Bosch Rexroth的发展历程
提供一些购买Rexroth R911328743的渠道
详细说明IndraDrive MPH Firmware Memory Card的技术参数
