Overview
The Finder 60.13.9.024.0040 is an 11‑pin octal plug‑in industrial power relay from Finder’s 60‑series product familyRohm(…. It features 3PDT (3‑Form‑C) change‑over contacts with AgNi silver‑nickel contact material, coil rated for 24 VDC control voltage, and 10 A resistive load capacity per contact pathState Elec…. Designed for socket‑mount installation inside control cabinets, this relay converts low‑voltage control signals to switch AC and DC field loads, widely used for auxiliary‑circuit switching within PLC, DCS and panel‑building automation systems. It integrates a lockable manual test button and mechanical position indicator for fast on‑site maintenance validation.
Core Hardware & Electrical Features
‑ Contact configuration: 3PDT three change‑over Form‑C contacts; 10 A resistive rating at 250 VAC, suitable for multi‑circuit simultaneous switching‑ Coil specification: 24 VDC operating coil, coil resistance 445Ω, operate time 11 ms, release time 4 msState Elec…‑ 11‑pin octal plug‑in form factor; must pair with compatible socket base for cabinet DIN‑rail or panel mountingAlibaba.co…‑ Built‑in lockable test push‑button and mechanical flag indicator, allows manual contact actuation for troubleshooting without coil power supply‑ Wide operating temperature range:‑40 °C up to +70 °C, CE, cULus, VDE safety certified for global industrial deploymentState Elec…‑ Dielectric isolation between coil‑to‑contacts reaches 2000 V, suitable for high‑EMI industrial cabinet environmentsRohm(…
Typical Industrial Application Scenarios
Finder 60.13.9.024.0040 relays are heavily deployed in industrial control panels, building‑automation cabinets, water‑treatment skids, OEM machine control boxes and legacy automation retrofit projects. Common load tasks include driving auxiliary relays, indicator lamps, small solenoid valves and alarm‑circuit signals. Common failure modes consist of contact burning under inductive‑load arcing, coil burnout from over‑voltage stress, and mechanical wear after high‑cycle switching operations. When the relay fails, connected field‑actuator circuits will lose switching control while upstream PLC logic remains functional.
Sourcing & Field Replacement Guidance
- Confirm full part‑number 60.13.9.024.0040 during procurement; other 60‑series variants differ in coil voltage and pin definition and cannot be directly substituted.
- Use matching 11‑pin socket base; poor socket contact will create intermittent switching faults.
- For inductive‑load applications, install external surge‑suppression components across load terminals to extend relay contact service life.
- After replacement, utilise the manual test button and verify each contact switching status before restoring equipment to normal operation.
Maintaining well‑tested spare Finder 60.13.9.024.0040 relays reduces auxiliary‑circuit downtime for industrial automation panel systems.
